Shenzhen Jianfeng Electronic Pet Product Co., Ltd.
Main products:electric dog control,Remote Dog Training Collar,electronic Dog Training Collar,electronic pet fencing system
Products
Contact Us
  • Contact Person : Ms. wei velly
  • Company Name : Shenzhen Jianfeng Electronic Pet Product Co., Ltd.
  • Tel : 86-0755-29589448
  • Fax : 86-0755-81077740
  • Address : Guangdong,shenzhen,xixiang RD.
  • Country/Region : China
  • Zip : 518100

Remote Dog Spray Collar without any Shock and Harm for Dog Traing

Remote Dog Spray Collar without any Shock and Harm for Dog Traing
Product Detailed
No shock,No virbration,No voice,No light Very frendly Rechargebale dog spray collar 3 level spray and 3 level voice

B. Operational instructions:

a. How to change or charge the batteries:

1. The lithium battery installed in the receiver can be recharged. Please use the charger the product offers to charge it. The power indicator light of the receiver will flash when it is being charged. If the charging has been finished, it will keep lighting. It will cost 2 to 4 hours to charge every time.

2. Remote controller: The battery cover is at the lower part of the back of the remote controller. Open the cover by pressing it following the direction of the arrow. Take out the battery (Model 6LR61, 9V) and put a new one back and then close the cover.

3. The lifetime of the batteries varies according as how you use the product. Since the remote controller only consumes electricity when you press the buttons to send out signals, its batteries’ lifetime is usually more than one year. After the receiver is turned on, it is in a standby state. In the standby state, it only consumes small amount of electricity. If you don’t use the product, please turn off the power switch of the receiver. A frequent use of it will consume electricity quickly. Therefore you should often check whether the batteries have enough electricity by watching the indicator light. When the electricity of the batteries is not enough , please use the appropriative charger to charge the batteries..

b.  How to turn on or turn off the power of the receiver

1 The electromagnetism induction power switch is installed in the receiver. Let the magnetic part of the remote controller approach to it, you can turn on or turn off the power of the receiver.

2 Approach the magnetic part of the remote controller to the electromagnetism induction switch of the receiver, then the power indicator light will flash. Keep it for three seconds,if the indicator light stop flashing, it means that the power has been turned on. If the indicator light goes out, it means that the power has been turned off.

c. How to fix and refill the gas storage bottle

1 Screw off the positioning bolt. Rotate the gas storage bottle and pull it out. Put it in the receiver, and screw up the positioning bolt.(Don’t screw too forcibly, or the thread of the bolt will be damaged.)Then the fixing of the gas storage bottle will be finished.

2 When the gas storage bottle is short of spray, please take it down and use the refill bottle to refill.

3 The refill bottle is used to refill the gas storage bottle. Please upside down the refill bottle and insert the nozzle into the refill hole of the gas storage bottle. Press firmly to fill the unit. (20 seconds)

Remote Dog Spray Collar without any Shock and Harm for Dog Traing



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.